UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20035
                        
                            Issued:1979-12-07
                    
                            Revised:2012-03-19
                    
                            Style
                            20035
                        
                            Parallel Cable with Extruded Insulation Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, VW-1 flame.
		
			Conductor30 AWG - 16 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Labeled or complying with manufacturer's AWM procedure for Style 1061.
		
			ShieldExtruded black conductive PVC, 6 mils minimum thickness, 12 mils maximum thickness, 12-30 mils thick over bare drain wire located as edge conductor. Shield forms web, minimum 6 mils thick, 6-12 mils wide.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingJacket to be Surface Printed "Conductive PVC Shield." Tag marked "VW-1"
		
			UseInternal Wiring of Audio and Video Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20035	Issued:1979-12-07
			Revised:2012-03-19


Rating	80 deg C, 300 Vac, VW-1 flame.

Conductor	30 AWG - 16 AWG solid or stranded round, tinned or bare.

Insulation	Extruded SRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Labeled or complying with manufacturer's AWM procedure for Style 1061.

Shield	Extruded black conductive PVC, 6 mils minimum thickness, 12 mils maximum thickness, 12-30 mils thick over bare drain wire located as edge conductor. Shield forms web, minimum 6 mils thick, 6-12 mils wide.

Jacket	Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	Jacket to be Surface Printed "Conductive PVC Shield." Tag marked "VW-1"

Use	Internal Wiring of Audio and Video Equipment.