UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20043
                        
                            Issued:1980-02-15
                    
                            Revised:2011-10-11
                    
                            Style
                            20043
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG solid or stranded.
		
			InsulationExtruded PVC, 15 mils mininum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded PVC, 6 mil minimum thickness at any point, may be extruded over the conductor .assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC, 15 mils mininum average thickness, 12 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment where not subjected to repeated flexing in end application.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20043	Issued:1980-02-15
			Revised:2011-10-11


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG solid or stranded.

Insulation	Extruded PVC, 15 mils mininum average thickness, 13 mils minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded PVC, 6 mil minimum thickness at any point, may be extruded over the conductor .assembly.

Shield	Optional.

Jacket	Extruded PVC, 15 mils mininum average thickness, 12 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment where not subjected to repeated flexing in end application.