UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20045
                        
                            Issued:1980-02-15
                    
                            Revised:2011-10-26
                    
                            Style
                            20045
                        
                            Multiple-conductor cable using non-intergal jacket.
                    
			Rating80 deg C, 30 Vac, VW-1 flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationExtruded solid PE, extruded foamed PE, extruded solid XLPE or extruded foamed XLPE, 4 mils minimum thickness at any point, 100 mils maximum thickness.
		
			AssemblyTwo to four conductors. Barrier layer and/or fillers are optional.
		
			ShieldBraid or spiral wrap construction using steel, nickel, tin, copper plated steel, copper plated iron alloy or copper plated nickel wires.
		
			CoveringOptional, over any or all singles, extruded PVC, extruded Nylon (Polyamide), extruded Polyester, extruded PVDF, extruded ETFE or Lacquered Braid, 2 mils minimum thickness at any point.
		
			JacketExtruded PVC, 5 mils minimum average thickness, 3 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring where not subjected to repeated flexing in end application.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20045	Issued:1980-02-15
			Revised:2011-10-26


Rating	80 deg C, 30 Vac, VW-1 flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Extruded solid PE, extruded foamed PE, extruded solid XLPE or extruded foamed XLPE, 4 mils minimum thickness at any point, 100 mils maximum thickness.

Assembly	Two to four conductors. Barrier layer and/or fillers are optional.

Shield	Braid or spiral wrap construction using steel, nickel, tin, copper plated steel, copper plated iron alloy or copper plated nickel wires.

Covering	Optional, over any or all singles, extruded PVC, extruded Nylon (Polyamide), extruded Polyester, extruded PVDF, extruded ETFE or Lacquered Braid, 2 mils minimum thickness at any point.

Jacket	Extruded PVC, 5 mils minimum average thickness, 3 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring where not subjected to repeated flexing in end application.