UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20046
                        
                            Issued:1980-02-15
                    
                            Revised:2011-10-06
                    
                            Style
                            20046
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum Material not specified.
		
			InsulationExtruded solid PVC, extruded foamed PVC, extruded solid XLPVC, or extruded foamed XLPVC. 4 mils minimum average thickness.
		
			AssemblyTwo through seven insulated singles twisted together, length of lay not specified. Barrier layer and/or fillers optional. Fillers may be twisted with singles or insulated singles may be twisted around central filler core.
		
			ShieldBraid or spiral wrap construction using steel, nickel, tin or copper-plated steel, or copper- plated iron alloy, or copper-plated nickel wires.
		
			JacketExtruded PVC, 5 mils min average, 3 mils min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wire of Class 2 Circuits in Electronic Equipment where not subjected to repeated flexing in end application.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20046	Issued:1980-02-15
			Revised:2011-10-06


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum Material not specified.

Insulation	Extruded solid PVC, extruded foamed PVC, extruded solid XLPVC, or extruded foamed XLPVC. 4 mils minimum average thickness.

Assembly	Two through seven insulated singles twisted together, length of lay not specified. Barrier layer and/or fillers optional. Fillers may be twisted with singles or insulated singles may be twisted around central filler core.

Shield	Braid or spiral wrap construction using steel, nickel, tin or copper-plated steel, or copper- plated iron alloy, or copper-plated nickel wires.

Jacket	Extruded PVC, 5 mils min average, 3 mils min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wire of Class 2 Circuits in Electronic Equipment where not subjected to repeated flexing in end application.