UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20049
                        
                            Issued:1980-04-09
                    
                            Revised:2019-11-07
                    
                            Style
                            20049
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 600 Vac, Horizontal flame.
		
			Conductor28 AWG - 16 AWG solid or stranded round, tinned or bare copper. Different conductor sizes may be used in one cord.
		
			InsulationPVC, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyTwo conductors may be laid parallel or twisted together. Three or more conductors shall be twisted together. Lay of insulated conductors not specified, but with a twist opposite in direction to the direction in which the helical cord is wound.
		
			ShieldOptional. Over one or more of the individually insulated conductors may be shielded or groups of individually insulated conductors may be shielded. Shielding over conductor shall consist of No. 36-30 AWG, tinned or untinned copper strands applied as a wrap or braid.
		
			JacketPVC
		
			dia of cable under jacket
		
			0.425 inches or less30 mils min average24 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20049	Issued:1980-04-09
			Revised:2019-11-07


Rating	60 deg C, 600 Vac, Horizontal flame.

Conductor	28 AWG - 16 AWG solid or stranded round, tinned or bare copper. Different conductor sizes may be used in one cord.

Insulation	PVC, 30 mils min average, 27 mils minimum at any point.

Assembly	Two conductors may be laid parallel or twisted together. Three or more conductors shall be twisted together. Lay of insulated conductors not specified, but with a twist opposite in direction to the direction in which the helical cord is wound.

Shield	Optional. Over one or more of the individually insulated conductors may be shielded or groups of individually insulated conductors may be shielded. Shielding over conductor shall consist of No. 36-30 AWG, tinned or untinned copper strands applied as a wrap or braid.

Jacket	PVC
	dia of cable under jacket
	0.425 inches or less	30 mils min average	24 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.