UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20051
                        
                            Issued:1980-04-24
                    
                            Revised:2012-05-20
                    
                            Style
                            20051
                        
                            Bonded Flat Cable
                    
			Rating105 deg C, 600 Vac, Horizontal Flame.
		
			Conductor36 AWG - 20 AWG, Solid or Stranded Round or Flat conductors. Min thickness of 2 mils; max thickness of 6 mils. Min width of 10 mils; max width of 100 mils. Conductors may be straight or irregular shaped and in one plane.
		
			InsulationNon-Extruded PET, 5 mils min average. On each side of the conductors there are two layers of insulation, each consisting of 2 mil min at any point wall of PET (polyester) with a min 1 mil polyester adhesive backing bonded together. Min 40 mils insulation width on outside edges of conductors and 25 mils min width insulation between adjacent conductors. Length of insulated conductors not specified.
		
			AssemblyTwo through 200 conductors
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20051	Issued:1980-04-24
			Revised:2012-05-20


Rating	105 deg C, 600 Vac, Horizontal Flame.

Conductor	36 AWG - 20 AWG, Solid or Stranded Round or Flat conductors. Min thickness of 2 mils; max thickness of 6 mils. Min width of 10 mils; max width of 100 mils. Conductors may be straight or irregular shaped and in one plane.

Insulation	Non-Extruded PET, 5 mils min average. On each side of the conductors there are two layers of insulation, each consisting of 2 mil min at any point wall of PET (polyester) with a min 1 mil polyester adhesive backing bonded together. Min 40 mils insulation width on outside edges of conductors and 25 mils min width insulation between adjacent conductors. Length of insulated conductors not specified.

Assembly	Two through 200 conductors

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.