UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20054
                        
                            Issued:1980-05-08
                    
                            Revised:2012-04-05
                    
                            Style
                            20054
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 150 Vac, Horizontal Flame.
		
			Conductor20-36 AWG, solid or stranded.
		
			InsulationExtruded or heat laminated PVC, 6 mils minimum thickness at any point.
		
			AssemblyTwo through 150 conductors. Laid parallel, spaced 0.013 inch minimum between conductors. One or more conductors may be in electrical contact with ground plane as drain wires.
		
			ShieldGround Plane - Pressure sensitive aluminum faced polyester tape on one or both sides of insulated conductor assembly. May be in electrical contact with drain wire.
		
			JacketExtruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment, such as computers and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20054	Issued:1980-05-08
			Revised:2012-04-05


Rating	105 deg C, 150 Vac, Horizontal Flame.

Conductor	20-36 AWG, solid or stranded.

Insulation	Extruded or heat laminated PVC, 6 mils minimum thickness at any point.

Assembly	Two through 150 conductors. Laid parallel, spaced 0.013 inch minimum between conductors. One or more conductors may be in electrical contact with ground plane as drain wires.

Shield	Ground Plane - Pressure sensitive aluminum faced polyester tape on one or both sides of insulated conductor assembly. May be in electrical contact with drain wire.

Jacket	Extruded PVC, 10 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment, such as computers and electric business machines.