UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20055
                        
                            Issued:1980-05-08
                    
                            Revised:2012-01-11
                    
                            Style
                            20055
                        
                            Bonded or laminated flat ribbon Cable
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor20-36 AWG, solid or stranded, tinned or bare copper, laid parallel spaced 0.025 inch minimum between conductors. One or more conductors may be in electrical contact with ground plane as drain wires.
		
			InsulationPVC, 9 mils min. average, 7 mils min. at any point. Top and/or bottom layers may form ridges. Extruded or heat laminated.
		
			AssemblyTwo through 150 conductors
		
			ShieldOptional.
		
			JacketPVC, 15 mils min average, 12 mils minimum at any point.
		
			Misc.Ground-Plane Pressure sensitive aluminum faced polyester tape on one or both sides of insulated conductor assembly. May be in electrical contact with drain wire.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment, such as computers and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20055	Issued:1980-05-08
			Revised:2012-01-11


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	20-36 AWG, solid or stranded, tinned or bare copper, laid parallel spaced 0.025 inch minimum between conductors. One or more conductors may be in electrical contact with ground plane as drain wires.

Insulation	PVC, 9 mils min. average, 7 mils min. at any point. Top and/or bottom layers may form ridges. Extruded or heat laminated.

Assembly	Two through 150 conductors

Shield	Optional.

Jacket	PVC, 15 mils min average, 12 mils minimum at any point.

Misc.	Ground-Plane Pressure sensitive aluminum faced polyester tape on one or both sides of insulated conductor assembly. May be in electrical contact with drain wire.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment, such as computers and electric business machines.