UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20060
                        
                            Issued:1980-06-27
                    
                            Revised:2012-12-13
                    
                            Style
                            20060
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 125 Vac, Horizontal flame.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			Conductor0.125 to 2.5 sq mm. Solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			CoveringOptional. Extruded PVC, 6 mils or heavier.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.350 inches or less15 mils12 mils
		
			0.351-0.700 inches30 mils24 mils
		
			0.701-1.000 inches45 mils36 mils
		
			1.001-1.500 inches60 mils48 mils
		
			*Major dia of cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20060	Issued:1980-06-27
			Revised:2012-12-13


Rating	60 deg C, 125 Vac, Horizontal flame.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Conductor	0.125 to 2.5 sq mm. Solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Covering	Optional. Extruded PVC, 6 mils or heavier.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket*	Minimum average thickness	Minimum thickness at any point
	0.350 inches or less	15 mils	12 mils
	0.351-0.700 inches	30 mils	24 mils
	0.701-1.000 inches	45 mils	36 mils
	1.001-1.500 inches	60 mils	48 mils
	*Major dia of cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.