UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20066
                        
                            Issued:1980-07-18
                    
                            Revised:2019-11-07
                    
                            Style
                            20066
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 125 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			1.000 inches or less*30 mils min average24 mils min at any point
		
			1.001-1.500 dia45 avg36 min
		
			1.501-2.500 dia60 avg48 min
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20066	Issued:1980-07-18
			Revised:2019-11-07


Rating	105 deg C, 125 Vac, Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional - A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	dia of cable under jacket
	1.000 inches or less*	30 mils min average	24 mils min at any point
	1.001-1.500 dia	45 avg	36 min
	1.501-2.500 dia	60 avg	48 min
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.