UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20069
                        
                            Issued:1980-07-28
                    
                            Revised:2012-01-31
                    
                            Style
                            20069
                        
                            Laminated flat ribbon cable
                    
			Rating105 deg C, 125 Vac
		
			ConductorEquivalent to Nos. 36 to 10 AWG, bare or tinned flat copper conductors. Minimum thickness of 1.0 mils, maximum thickness of 12.0 mils. Minimum width of 10 mils, maximum width of 750 mils. Conductors may be straight or irregular in shape.
		
			InsulationOn each side of the flat conductors a 1.0 (Laminated Tapes) mil min wall of "Kapton" H film. The layers are bonded together by means of a thermosetting epoxy. Insulation width on outside edges of conductors not less than l5 mils and not less than 20 mils width of insulation between adjacent conductors. Length of insulated conductors not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20069	Issued:1980-07-28
			Revised:2012-01-31


Rating	105 deg C, 125 Vac

Conductor	Equivalent to Nos. 36 to 10 AWG, bare or tinned flat copper conductors. Minimum thickness of 1.0 mils, maximum thickness of 12.0 mils. Minimum width of 10 mils, maximum width of 750 mils. Conductors may be straight or irregular in shape.

Insulation	On each side of the flat conductors a 1.0 (Laminated Tapes) mil min wall of "Kapton" H film. The layers are bonded together by means of a thermosetting epoxy. Insulation width on outside edges of conductors not less than l5 mils and not less than 20 mils width of insulation between adjacent conductors. Length of insulated conductors not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.