UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20073
                        
                            Issued:1980-07-30
                    
                            Revised:2012-05-02
                    
                            Style
                            20073
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationExtruded solid PE, solid FRPE, solid XLPE, solid XLFRPE, foamed PE, foamed FRPE, foamed XLPE or foamed XLFRPE, 5 mils minimum thickness at any point, 100 mils maximum thickness.
		
			CoveringOptional - Extruded PVC, PE, Polyamide or Polyester, approximately 0.002 in. thick or lacquered braid, or spiral wrap of minimum 0.0006 inch thick polyester tape applied with approximate 50 percent overlap.
		
			ShieldOptional.
		
			AssemblyTwo to fifty insulated wires laid parallel in one plane, laminated between 2 sheets of PVC, with or without irradiation. Minimum 39 mils between conductors, 15 mils minimum edge width.
		
			JacketExtruded PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20073	Issued:1980-07-30
			Revised:2012-05-02


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Extruded solid PE, solid FRPE, solid XLPE, solid XLFRPE, foamed PE, foamed FRPE, foamed XLPE or foamed XLFRPE, 5 mils minimum thickness at any point, 100 mils maximum thickness.

Covering	Optional - Extruded PVC, PE, Polyamide or Polyester, approximately 0.002 in. thick or lacquered braid, or spiral wrap of minimum 0.0006 inch thick polyester tape applied with approximate 50 percent overlap.

Shield	Optional.

Assembly	Two to fifty insulated wires laid parallel in one plane, laminated between 2 sheets of PVC, with or without irradiation. Minimum 39 mils between conductors, 15 mils minimum edge width.

Jacket	Extruded PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 circuits in electronic equipment.