UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20076
                        
                            Issued:1980-08-14
                    
                            Revised:2011-11-04
                    
                            Style
                            20076
                        
                            Bonded flat ribbon cable.
                    
			Rating90 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 14 AWG bare, silver plated, tin plated or nickel plated copper.
		
			InsulationPET. On each side of the conductors 4 mils min average, 3 mils minimum at any point. PET bonded together with minimum 25 mil insulation width on outside edges of conductors (5 mils minimum if a preinsulated conductor is used), and 25 mils minimum width insulation between adjacent conductors. Edge conductor may be preinsulated with a min. 1 mils of laminted tape PET with a polyester of PVC adhesive.
		
			AssemblyTwo through 100 conductors. Edge conductor may be preinsulated with a minimum of one mil of laminated tape of PET with a polyester of PVC adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment. (Such as, computers and business machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20076	Issued:1980-08-14
			Revised:2011-11-04


Rating	90 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 14 AWG bare, silver plated, tin plated or nickel plated copper.

Insulation	PET. On each side of the conductors 4 mils min average, 3 mils minimum at any point. PET bonded together with minimum 25 mil insulation width on outside edges of conductors (5 mils minimum if a preinsulated conductor is used), and 25 mils minimum width insulation between adjacent conductors. Edge conductor may be preinsulated with a min. 1 mils of laminted tape PET with a polyester of PVC adhesive.

Assembly	Two through 100 conductors. Edge conductor may be preinsulated with a minimum of one mil of laminated tape of PET with a polyester of PVC adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment. (Such as, computers and business machines).