UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20087
                        
                            Issued:1980-10-06
                    
                            Revised:2012-03-23
                    
                            Style
                            20087
                        
                            Multiple-conductor cable using non-integral extruded jacket.
                    
			Rating75 deg C, 120 Vac, Horizontal flame.
		
			ConductorConstructuon A - Two or three, 0.002 by 0.010 inches, flat copper ribbons wound spirally, 11 to 20 turns per inch, over a rayon or polyester core.

Construction B - One or two No. 32-35 AWG copper conductors wound spirally, 11 to 20 turns per inch, over a rayon or polyester core.

Sensor (Optional) - Stainless steel fiber located between the conductive core and the insulation. Not evaluated as a Sensor. 

			Conductive coreTwo conductors laid parallel within the carbon-loaded polyethylene, thickness not specified.
		
			InsulationExtruded EVA or extruded PVC, 13 mils min average, 12 mils minimum at any point. See facing page for EVA compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Bedding.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20087	Issued:1980-10-06
			Revised:2012-03-23


Rating	75 deg C, 120 Vac, Horizontal flame.

Conductor	Constructuon A - Two or three, 0.002 by 0.010 inches, flat copper ribbons wound spirally, 11 to 20 turns per inch, over a rayon or polyester core. Construction B - One or two No. 32-35 AWG copper conductors wound spirally, 11 to 20 turns per inch, over a rayon or polyester core. Sensor (Optional) - Stainless steel fiber located between the conductive core and the insulation. Not evaluated as a Sensor.

Conductive core	Two conductors laid parallel within the carbon-loaded polyethylene, thickness not specified.

Insulation	Extruded EVA or extruded PVC, 13 mils min average, 12 mils minimum at any point. See facing page for EVA compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Bedding.