UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20090
                        
                            Issued:1980-12-08
                    
                            Revised:2012-07-20
                    
                            Style
                            20090
                        
                            Multiconductor Cable with Extruded Non-Intergral Jacket.
                    
			Rating105 deg C, Voltage rating not specified, Cable flame.
		
			Conductor36 AWG - 10 AWG. May use same or mixed AWG size.
		
			InsulationLabeled or complying with manufacturers procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 6 mil or heavier thickness. May be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less60 mils48 mils
		
			0.701-1.500 inchs80 mils64 mils
		
			1.501-2.500 inchs110 mils88 mils
		
			2.501 inchs or greater140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20090	Issued:1980-12-08
			Revised:2012-07-20


Rating	105 deg C, Voltage rating not specified, Cable flame.

Conductor	36 AWG - 10 AWG. May use same or mixed AWG size.

Insulation	Labeled or complying with manufacturers procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional - Extruded PVC, 6 mil or heavier thickness. May be extruded over the conductor assembly.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	60 mils	48 mils
	0.701-1.500 inchs	80 mils	64 mils
	1.501-2.500 inchs	110 mils	88 mils
	2.501 inchs or greater	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.