UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20091
                        
                            Issued:1980-10-23
                    
                            Revised:2012-07-23
                    
                            Style
                            20091
                        
                            Bonded or laminated flat ribbon cable
                    
			Rating105 deg C, 125 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG bare or tinned flat coper conductors. Minimum thickness of 1.0 mils, maximum thickness of 12.0 mils. Minimum width of 10 mils, maximum width of 750 mils. Conductors may be straight or irregular in shape.
		
			InsulationLaminated Tapes. On each side of the flat conductors a 1.0 mil min wall of "Kapton" H film. Insulation width on outside edges of conductors not less than 15 mils and not less than 20 mils width of insulation between adjacent conductors. Length of insulated conductors not specified.
		
			AssemblyThe insulated layers are bonded together by means of an acrylic or epoxy- polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20091	Issued:1980-10-23
			Revised:2012-07-23


Rating	105 deg C, 125 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG bare or tinned flat coper conductors. Minimum thickness of 1.0 mils, maximum thickness of 12.0 mils. Minimum width of 10 mils, maximum width of 750 mils. Conductors may be straight or irregular in shape.

Insulation	Laminated Tapes. On each side of the flat conductors a 1.0 mil min wall of "Kapton" H film. Insulation width on outside edges of conductors not less than 15 mils and not less than 20 mils width of insulation between adjacent conductors. Length of insulated conductors not specified.

Assembly	The insulated layers are bonded together by means of an acrylic or epoxy- polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.