UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20093
                        
                            Issued:1980-12-11
                    
                            Revised:2019-11-07
                    
                            Style
                            20093
                        
                            Multiple conductor with extruded insulation.
                    
			Rating60, 80, 90 deg C, 150 Vac, Cable flame.
		
			Conductor36 AWG - 18 AWG solid or stranded round.
		
			InsulationPP, 8 mils min average.
		
			AssemblyTwo to 100 conductors individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketPVC
		
			dia of cable under jacket
		
			0.500 inches or less15 mils min average
		
			0.501-0.700 dia30 avg
		
			0.701-1.000 dia45 avg
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment in nonhazardous locations where the suitability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20093	Issued:1980-12-11
			Revised:2019-11-07


Rating	60, 80, 90 deg C, 150 Vac, Cable flame.

Conductor	36 AWG - 18 AWG solid or stranded round.

Insulation	PP, 8 mils min average.

Assembly	Two to 100 conductors individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	PVC
	dia of cable under jacket
	0.500 inches or less	15 mils min average
	0.501-0.700 dia	30 avg
	0.701-1.000 dia	45 avg

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment in nonhazardous locations where the suitability of the combination has been determined by Underwriters Laboratories Inc.