UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20094
                        
                            Issued:1980-12-22
                    
                            Revised:2012-05-21
                    
                            Style
                            20094
                        
                            Laminated Flat Ribbon Cable
                    
			Rating125 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG bare or tinned flat copper conductors. Minimum thickness of 1.0 mils, maximum thickness of 8.0 mils. Minimum width of 10 mils, maximum width of 750 mils. Conductors may be straight or irregular In shape.
		
			InsulationExtruded POLYIMIDE, On each side of the flat conductors. a 2 mil min wall of polyimide film. The layers are bonded together by means of a modified thermosetting epoxy. Insulation width on outside edges of conductors not less than 22 mils and not less than 10 mils width of insulation between adjacent conductors. Length of insulated conductors not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20094	Issued:1980-12-22
			Revised:2012-05-21


Rating	125 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG bare or tinned flat copper conductors. Minimum thickness of 1.0 mils, maximum thickness of 8.0 mils. Minimum width of 10 mils, maximum width of 750 mils. Conductors may be straight or irregular In shape.

Insulation	Extruded POLYIMIDE, On each side of the flat conductors. a 2 mil min wall of polyimide film. The layers are bonded together by means of a modified thermosetting epoxy. Insulation width on outside edges of conductors not less than 22 mils and not less than 10 mils width of insulation between adjacent conductors. Length of insulated conductors not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.