UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2010
                        
                            Issued:1959-05-01
                    
                            Revised:2011-09-24
                    
                            Style
                            2010
                        
                            Style SPT-2 Cord.
                    
			Rating90 deg C, 300 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			Conductor20 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded, tinned or bare copper.
		
			InsulationIntegral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.
		
			AssemblyTwo conductor, Same as SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use on heating pads or on electric blankets; or as internal wiring of electric fans; or as internal wiring of lighting circuits in electric refrigerators; or internal wiring of lighting circuits in electric refrigerators where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C, (whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2010	Issued:1959-05-01
			Revised:2011-09-24


Rating	90 deg C, 300 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	20 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded, tinned or bare copper.

Insulation	Integral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.

Assembly	Two conductor, Same as SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use on heating pads or on electric blankets; or as internal wiring of electric fans; or as internal wiring of lighting circuits in electric refrigerators; or internal wiring of lighting circuits in electric refrigerators where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C, (whichever is applicable). Polarity identification may be omitted.