UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20102
                        
                            Issued:1981-01-21
                    
                            Revised:2012-03-27
                    
                            Style
                            20102
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor32 AWG - 20 AWG solid or stranded, tinned or bare, copper or copper alloy. (Optional) 1 mil max wall of an alkyd enamel over the copper conductors. Same or mixed AWG sizes.
		
			InsulationExtruded PE, Foamed PE, Extruded FRPE, Foamed FRPE, Extruded XLPE, Foamed XLPE, Extruded XLFRPE, Foamed XLFRPE, Extruded PP, Foamed PP, 7 mils min thickness at any point.
		
			AssemblyMulti-conductor, same as type SPT. Insulated conductor is built with optional shield, inner jacket, optional shield, middle and outer jacket. Cable Assembly - (Optional) Two or more groups of the cable described above may be bonded together to form a flat cable, 100 conductors max.
		
			ShieldOptional.
		
			Inner JacketExtruded PVC, 9 mil min average, 7 mil min at any point. (Optional) Alignment rib may be provided on outside conductors. Min. thickness at any point may be reduced to 3 mils where the drain wire contacts the jacket.
		
			Middle JacketOver the cable assembly a Thermoplastic-Elastomer 45 mils min average, 36 mils min at any point.
		
			Outer JacketExtruded PVC, 35 mils min average, 30 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection or Internal Wiring Equipment in Class 2 Circuits Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20102	Issued:1981-01-21
			Revised:2012-03-27


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	32 AWG - 20 AWG solid or stranded, tinned or bare, copper or copper alloy. (Optional) 1 mil max wall of an alkyd enamel over the copper conductors. Same or mixed AWG sizes.

Insulation	Extruded PE, Foamed PE, Extruded FRPE, Foamed FRPE, Extruded XLPE, Foamed XLPE, Extruded XLFRPE, Foamed XLFRPE, Extruded PP, Foamed PP, 7 mils min thickness at any point.

Assembly	Multi-conductor, same as type SPT. Insulated conductor is built with optional shield, inner jacket, optional shield, middle and outer jacket. Cable Assembly - (Optional) Two or more groups of the cable described above may be bonded together to form a flat cable, 100 conductors max.

Shield	Optional.

Inner Jacket	Extruded PVC, 9 mil min average, 7 mil min at any point. (Optional) Alignment rib may be provided on outside conductors. Min. thickness at any point may be reduced to 3 mils where the drain wire contacts the jacket.

Middle Jacket	Over the cable assembly a Thermoplastic-Elastomer 45 mils min average, 36 mils min at any point.

Outer Jacket	Extruded PVC, 35 mils min average, 30 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection or Internal Wiring Equipment in Class 2 Circuits Only.