UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20103
                        
                            Issued:1981-01-18
                    
                            Revised:2012-05-02
                    
                            Style
                            20103
                        
                            Multiple-conductor cable using non-integral jacket with extruded insulation
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationExtruded solid PVC, solid PE, solid FRPE, solid XLPVC, solid XLPE, solid XLFRPE, foamed PVC, foamed PE, foamed FRPE, foamed XLPVC, foamed XLPE or foamed XLFRPE, 5 mils minimum thickness at any point, 100 mils maximum.
		
			Assembly2 - 31 insulated singles.  Insulated singles laid parallel to form flat cable.
		
			ShieldOptional - Conductive thermoplastic (PVC) shield, if used, may form a web between conductors under jacket and will include one or more drain wires covered by thermoplastic shield.
		
			CoveringOptional.
		
			JacketTwo laminated sheets, PVC or XLPVC,  5 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20103	Issued:1981-01-18
			Revised:2012-05-02


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Extruded solid PVC, solid PE, solid FRPE, solid XLPVC, solid XLPE, solid XLFRPE, foamed PVC, foamed PE, foamed FRPE, foamed XLPVC, foamed XLPE or foamed XLFRPE, 5 mils minimum thickness at any point, 100 mils maximum.

Assembly	2 - 31 insulated singles. Insulated singles laid parallel to form flat cable.

Shield	Optional - Conductive thermoplastic (PVC) shield, if used, may form a web between conductors under jacket and will include one or more drain wires covered by thermoplastic shield.

Covering	Optional.

Jacket	Two laminated sheets, PVC or XLPVC, 5 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.