UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20106
                        
                            Issued:1981-01-21
                    
                            Revised:2019-11-07
                    
                            Style
                            20106
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 16 AWG, solid or stranded.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier exteuded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.350 inches or less18 mils min average14 mils minimum at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment or Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20106	Issued:1981-01-21
			Revised:2019-11-07


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 16 AWG, solid or stranded.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional - A 6 mil or heavier exteuded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	dia of cable under jacket
	0.350 inches or less	18 mils min average	14 mils minimum at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment or Appliances.