UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20115
                        
                            Issued:1981-02-24
                    
                            Revised:2011-12-27
                    
                            Style
                            20115
                        
                            Bonded or laminated flat ribbon cable.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's procedure.
		
			AssemblyThe cable consisting of from 2 to 100 conductors bonded to a PVC sheet, 4 mils min at any point in such a fashion to form a flat ribbon type cable.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC or heat sealed PVC tape, polyamide, polyester, FEP, or, 2 mils min at any point. Required over any shield except braided metal. Optional over braided metal shield.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20115	Issued:1981-02-24
			Revised:2011-12-27


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's procedure.

Assembly	The cable consisting of from 2 to 100 conductors bonded to a PVC sheet, 4 mils min at any point in such a fashion to form a flat ribbon type cable.

Shield	Optional.

Covering	Optional - Extruded PVC or heat sealed PVC tape, polyamide, polyester, FEP, or, 2 mils min at any point. Required over any shield except braided metal. Optional over braided metal shield.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.