UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20120
                        
                            Issued:1981-03-27
                    
                            Revised:2012-07-23
                    
                            Style
                            20120
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum material not specified.
		
			InsulationFRPE or PE or XLPE, Solid or cellular, 4 mils min average, 4 mils minimum at any point, 100 mils maximum. May be irradiated.
		
			ShieldOver each insulated conductor.
		
			CoveringOptional - over any or all singles - 2 mils minimum at any point extruded PVC, polymide, Polyester, PVDF, ETFE or lacquered Braid.
		
			JacketExtruded PVC, 5 mils min average, 3 mils min at any point before ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20120	Issued:1981-03-27
			Revised:2012-07-23


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum material not specified.

Insulation	FRPE or PE or XLPE, Solid or cellular, 4 mils min average, 4 mils minimum at any point, 100 mils maximum. May be irradiated.

Shield	Over each insulated conductor.

Covering	Optional - over any or all singles - 2 mils minimum at any point extruded PVC, polymide, Polyester, PVDF, ETFE or lacquered Braid.

Jacket	Extruded PVC, 5 mils min average, 3 mils min at any point before ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.