UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20123
                        
                            Issued:1981-03-27
                    
                            Revised:2012-04-25
                    
                            Style
                            20123
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 20 AWG Material not specified.
		
			InsulationExtruded ETFE or FEP or PFA or PTFE, TFE or XLPE may be cellular, 5 mils minimum average thickness
		
			AssemblyInsulated singles laid parallel to form flat cable. One or two layer spiral tape wrap using above material with minimum 50 percent overlap 5 mils minimum insulation thickness at any point. Insulated conductor is built with shield (optional), inner jacket, outer jacket (optional).
		
			ShieldOptional - Drain Wires may be embedded in web of jacket in physical contact with shields.
		
			JacketExtruded PVC, 7 mils min average. Jacket may form web 0.5 inch maximum width. 	(Optional outer jacket) Extruded PVC, 7 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20123	Issued:1981-03-27
			Revised:2012-04-25


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 20 AWG Material not specified.

Insulation	Extruded ETFE or FEP or PFA or PTFE, TFE or XLPE may be cellular, 5 mils minimum average thickness

Assembly	Insulated singles laid parallel to form flat cable. One or two layer spiral tape wrap using above material with minimum 50 percent overlap 5 mils minimum insulation thickness at any point. Insulated conductor is built with shield (optional), inner jacket, outer jacket (optional).

Shield	Optional - Drain Wires may be embedded in web of jacket in physical contact with shields.

Jacket	Extruded PVC, 7 mils min average. Jacket may form web 0.5 inch maximum width. (Optional outer jacket) Extruded PVC, 7 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.