UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20125
                        
                            Issued:1981-04-07
                    
                            Revised:2019-11-07
                    
                            Style
                            20125
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80, 90, 105 deg C, 30 Vac, VW-1 flame.
		
			Conductor50 AWG minimum - material not specified.
		
			InsulationExtruded FRPE or PE or TPES or PVC, 2 mils minimum average thickness.  Solid or cellular.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together.  Lay not specified.  Barrier layer and/or fillers optional.  Two or three conductors and/or conductor groups may be laid parallel to form flat cable.  Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			Covering(Optional) Extruded PVC, polyamide or polyester or lacquered braid.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.425 inches or less30 mils min average24 mils min at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring of Class 2 systems of electronic equipment. Cable must be terminated with connector at each end.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20125	Issued:1981-04-07
			Revised:2019-11-07


Rating	80, 90, 105 deg C, 30 Vac, VW-1 flame.

Conductor	50 AWG minimum - material not specified.

Insulation	Extruded FRPE or PE or TPES or PVC, 2 mils minimum average thickness. Solid or cellular.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Two or three conductors and/or conductor groups may be laid parallel to form flat cable. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	(Optional) Extruded PVC, polyamide or polyester or lacquered braid.

Jacket	Extruded PVC
	dia of cable under jacket
	0.425 inches or less	30 mils min average	24 mils min at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring of Class 2 systems of electronic equipment. Cable must be terminated with connector at each end.