UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20126
                        
                            Issued:1981-04-13
                    
                            Revised:2012-03-23
                    
                            Style
                            20126
                        
                            Bonded Flat Ribbon Cable
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG solid or stranded round, tinned or bare. May include mixed AWG sizes.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable. Insulated conductor is built with inner covering (optional), shield (optional), outer covering (optional).
		
			CoveringInner - Optional - One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mils minimum thickness at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.
		
			ShieldOptional.
		
			CoveringOuter - Optional - Extruded PVC 5 mils minimum thickness at any point, 80 mils maximum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equiupment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20126	Issued:1981-04-13
			Revised:2012-03-23


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG solid or stranded round, tinned or bare. May include mixed AWG sizes.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable. Insulated conductor is built with inner covering (optional), shield (optional), outer covering (optional).

Covering	Inner - Optional - One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mils minimum thickness at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.

Shield	Optional.

Covering	Outer - Optional - Extruded PVC 5 mils minimum thickness at any point, 80 mils maximum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equiupment.