UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20127
                        
                            Issued:1981-04-13
                    
                            Revised:2011-11-29
                    
                            Style
                            20127
                        
                            Laminated Flat Ribbon Cable
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			Assembly2 to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable.  Manufacturer shall maintain a record of all singles used in each cable.  Insulated conductor is built with one or two layer inner covering (optional), shield (optional) and outer covering (optional).  Film covering may be perforated with hole diameter and pattern not specified.
		
			CoveringInner - Optional.  PVC or Polyester/PVC film, 2 mils minimum thickness, laminated over the cable assembly.
		
			ShieldOptional.
		
			CoveringOuter - Optional.  Extruded PVC, 5 - 80 mils thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20127	Issued:1981-04-13
			Revised:2011-11-29


Rating	80 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	2 to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable. Insulated conductor is built with one or two layer inner covering (optional), shield (optional) and outer covering (optional). Film covering may be perforated with hole diameter and pattern not specified.

Covering	Inner - Optional. PVC or Polyester/PVC film, 2 mils minimum thickness, laminated over the cable assembly.

Shield	Optional.

Covering	Outer - Optional. Extruded PVC, 5 - 80 mils thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.