UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20128
                        
                            Issued:1981-04-13
                    
                            Revised:2011-12-21
                    
                            Style
                            20128
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating90 deg C, 300 Vac, Horizontal flame.
		
			Insulated ConductorNos. 36 AWG - 10 AWG, Labeled or complying with Section 1 of AWM Procedure minimum rating of 90c, 300 V.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable.
		
			Covering(Optional)one or two sheets of PVC or polyester/PVC laminated filem, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.
		
			ShieldOptional
		
			Covering(Optional) PVC, 5 miles min at any point, 80 mils max.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20128	Issued:1981-04-13
			Revised:2011-12-21


Rating	90 deg C, 300 Vac, Horizontal flame.

Insulated Conductor	Nos. 36 AWG - 10 AWG, Labeled or complying with Section 1 of AWM Procedure minimum rating of 90c, 300 V.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable.

Covering	(Optional)one or two sheets of PVC or polyester/PVC laminated filem, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.

Shield	Optional

Covering	(Optional) PVC, 5 miles min at any point, 80 mils max.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.