UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20129
                        
                            Issued:1981-04-13
                    
                            Revised:2012-04-26
                    
                            Style
                            20129
                        
                            Laminated flat ribbon cable.
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable.
		
			CoveringOptional. One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mils minimum thickness at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, 5 mils minimum thickness at any point, 80 mils maximum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20129	Issued:1981-04-13
			Revised:2012-04-26


Rating	90 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. May include mixed AWG sizes. Manufacturer shall maintain a record of all singles used in each cable.

Covering	Optional. One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mils minimum thickness at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified.

Shield	Optional.

Covering	Optional. Extruded PVC, 5 mils minimum thickness at any point, 80 mils maximum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.