UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20130
                        
                            Issued:1981-04-13
                    
                            Revised:2012-04-24
                    
                            Style
                            20130
                        
                            Flat Cable
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable. Insulated conductor is built with inner covering (optional), shield (optional), outer covering (optional).
		
			ShieldOptional.
		
			CoveringInner-Optional One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified. Outer -Optional- PVC, 5 mils min at any point, 80 mils max.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20130	Issued:1981-04-13
			Revised:2012-04-24


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two to 200 insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together or bonded to the PVC covering to form a flat ribbon type cable. Manufacturer shall maintain a record of all singles used in each cable. Insulated conductor is built with inner covering (optional), shield (optional), outer covering (optional).

Shield	Optional.

Covering	Inner-Optional One or two sheets of PVC or polyester/PVC laminated film, each sheet is 2 mil min at any point, laminated over the cable assembly. Film covering may be perforated. Hole diameter and pattern is not specified. Outer -Optional- PVC, 5 mils min at any point, 80 mils max.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.