UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20134
                        
                            Issued:1981-04-14
                    
                            Revised:2013-01-24
                    
                            Style
                            20134
                        
                            Laminated flat ribbon cable
                    
			Rating80 deg C, 125 Vac, 300 Vac peak, Horizontal flame.
		
			Conductor36 AWG - 12 AWG, round or flat, or polyurethane coated copper, 1.5 mils minimum thickness, 6.0 mils maximum thickness. 6 mils minimum width and 100 mils maximum width.
		
			InsulationPolyester film, 1.5 mils minimum thickness at any point, bonded on each side of conductor, 16 mils minimum width on outside edges of conductors and 16 mils minimum width between adjacent conductors. Length of insulated conductors not specified.
		
			Ground PlaneGround Plane - Copper foil or mesh, 0.8 mil minimum thickness, 6 mils maximum thickness. On each side of the ground plane 1.5 mils minimum at any point, of polyester. Minimum 16 mils of insulation on outside edges.
		
			Assembly2 - 150 conductors. Conductors may be straight or irregular shaped and laid parallel and in one plane. The cable consists of the insulated conductors and ground plane described above, bonded together with a polyester adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20134	Issued:1981-04-14
			Revised:2013-01-24


Rating	80 deg C, 125 Vac, 300 Vac peak, Horizontal flame.

Conductor	36 AWG - 12 AWG, round or flat, or polyurethane coated copper, 1.5 mils minimum thickness, 6.0 mils maximum thickness. 6 mils minimum width and 100 mils maximum width.

Insulation	Polyester film, 1.5 mils minimum thickness at any point, bonded on each side of conductor, 16 mils minimum width on outside edges of conductors and 16 mils minimum width between adjacent conductors. Length of insulated conductors not specified.

Ground Plane	Ground Plane - Copper foil or mesh, 0.8 mil minimum thickness, 6 mils maximum thickness. On each side of the ground plane 1.5 mils minimum at any point, of polyester. Minimum 16 mils of insulation on outside edges.

Assembly	2 - 150 conductors. Conductors may be straight or irregular shaped and laid parallel and in one plane. The cable consists of the insulated conductors and ground plane described above, bonded together with a polyester adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.