UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20135
                        
                            Issued:1981-04-16
                    
                            Revised:2012-03-19
                    
                            Style
                            20135
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, voltage not specified, Cable flame.
		
			Conductor40 AWG - 16 AWG, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.
		
			ShieldInner Shield - May consist of 38-30 AWG copper, tin plated or copper clad steel. May be applied as a wrap, braid or knitted braid.
		
			CoveringOptional. Extruded PVC, a 6 mil or heavier, may be extruded over the conductor assembly.
		
			ShieldOuter Shield - Same as inner shield.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal use in a medical Cable assembly.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20135	Issued:1981-04-16
			Revised:2012-03-19


Rating	60 deg C, voltage not specified, Cable flame.

Conductor	40 AWG - 16 AWG, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.

Shield	Inner Shield - May consist of 38-30 AWG copper, tin plated or copper clad steel. May be applied as a wrap, braid or knitted braid.

Covering	Optional. Extruded PVC, a 6 mil or heavier, may be extruded over the conductor assembly.

Shield	Outer Shield - Same as inner shield.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External use in a medical Cable assembly.