UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20136
                        
                            Issued:1981-04-29
                    
                            Revised:2012-04-17
                    
                            Style
                            20136
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 50 Vac, VW-1 flame.
		
			Conductor40 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded FRPE, extruded PE, extruded PVC, extruded XLPE, extruded XLPVC, extruded foamed FRPE, extruded foamed PE or extruded foamed XLPE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			AssemblyTwo to 20 conductors, twisted singles or groups of twisted singles cabled together, lay not specified. Fillers and/or barrier layer optional.
		
			ShieldOptional.
		
			JacketExtruded PVC, 5 mils minimum average thickness, 4 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePick up lead of video disc in Class 2 circuits (Less than 15 W where cable is within the enclosure and not subject to abrasion.)
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20136	Issued:1981-04-29
			Revised:2012-04-17


Rating	80 deg C, 50 Vac, VW-1 flame.

Conductor	40 AWG - 20 AWG, solid or stranded.

Insulation	Extruded FRPE, extruded PE, extruded PVC, extruded XLPE, extruded XLPVC, extruded foamed FRPE, extruded foamed PE or extruded foamed XLPE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Assembly	Two to 20 conductors, twisted singles or groups of twisted singles cabled together, lay not specified. Fillers and/or barrier layer optional.

Shield	Optional.

Jacket	Extruded PVC, 5 mils minimum average thickness, 4 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pick up lead of video disc in Class 2 circuits (Less than 15 W where cable is within the enclosure and not subject to abrasion.)