UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20152
                        
                            Issued:1982-02-23
                    
                            Revised:2012-04-25
                    
                            Style
                            20152
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating90 deg C, 120 Vac, 240 Vac, 300 Vac, Horizontal flame.
		
			Conductor20 AWG - 14 AWG, stranded, copper.
		
			InsulationExtruded PUR or TPE, 13 mils minimum  thickness11 mils minimum thickness at any point. If the optional covering is not employed, the insulation thickness shall be 20 mils minimum average, 18 mils minimum at any point. See Facing Page for compound.
		
			AssemblyTwo or three insulated conductors.
		
			ShieldOptional.
		
			CoveringOptional - modified polyurethane, polyester or thermoplastic elastomer, 6 mils minimum at any point.
		
			JacketOptional. Extruded ETFE or PUR, 13 mils minimum average thickness, 11 mils minimum thickness at any point. or TPE, 18 mils minimum average, 14 mils minimum at any point. See Facing Page for compound.
		
			Misc.Conductive Core - Over the conductor is an extruded carbon-loaded (radiation cross-linked) polyolefin, thickness not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20152	Issued:1982-02-23
			Revised:2012-04-25


Rating	90 deg C, 120 Vac, 240 Vac, 300 Vac, Horizontal flame.

Conductor	20 AWG - 14 AWG, stranded, copper.

Insulation	Extruded PUR or TPE, 13 mils minimum thickness11 mils minimum thickness at any point. If the optional covering is not employed, the insulation thickness shall be 20 mils minimum average, 18 mils minimum at any point. See Facing Page for compound.

Assembly	Two or three insulated conductors.

Shield	Optional.

Covering	Optional - modified polyurethane, polyester or thermoplastic elastomer, 6 mils minimum at any point.

Jacket	Optional. Extruded ETFE or PUR, 13 mils minimum average thickness, 11 mils minimum thickness at any point. or TPE, 18 mils minimum average, 14 mils minimum at any point. See Facing Page for compound.

Misc.	Conductive Core - Over the conductor is an extruded carbon-loaded (radiation cross-linked) polyolefin, thickness not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.