UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20153
                        
                            Issued:1981-10-21
                    
                            Revised:2012-03-19
                    
                            Style
                            20153
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted insulated singles or groups of twisted singles twisted together or groups of twisted singles may be laid parallel to form flat or oval cable. May include mixed conductor sizes. Lay not specified; barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.  Diameter of assembly under jacket one inch maximum.
		
			ShieldOptional.
		
			CoveringOptional- A 6 mils or heavier covering of PE, PTFE, PVC, PFA, FEP, or ETFE may be extruded over the conductor assembly or groups of singles.
		
			BraidOptional.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment in Class 2 systems only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20153	Issued:1981-10-21
			Revised:2012-03-19


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted insulated singles or groups of twisted singles twisted together or groups of twisted singles may be laid parallel to form flat or oval cable. May include mixed conductor sizes. Lay not specified; barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Diameter of assembly under jacket one inch maximum.

Shield	Optional.

Covering	Optional- A 6 mils or heavier covering of PE, PTFE, PVC, PFA, FEP, or ETFE may be extruded over the conductor assembly or groups of singles.

Braid	Optional.

Jacket	Extruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment in Class 2 systems only.