UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20155
                        
                            Issued:1981-11-13
                    
                            Revised:2012-03-23
                    
                            Style
                            20155
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating105 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG minimum, solid or stranded round, tinned or bare. May use same or mixed AWG size.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional. In accordance with the Standard.
		
			CoveringOptional - A 6 mil thick or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches) ¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.425 inches or less3024
		
			0.425-0.7004536
		
			0.701-1.5006048
		
			major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment or appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20155	Issued:1981-11-13
			Revised:2012-03-23


Rating	105 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG minimum, solid or stranded round, tinned or bare. May use same or mixed AWG size.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional. In accordance with the Standard.

Covering	Optional - A 6 mil thick or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches) ¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.425 inches or less	30	24
	0.425-0.700	45	36
	0.701-1.500	60	48
	major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment or appliances.