UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20159
                        
                            Issued:1982-01-20
                    
                            Revised:2012-03-23
                    
                            Style
                            20159
                        
                            Multiple conductor with extruded insulation.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturers AWM procedure using extruded PVC or extruded XLPVC insulation , minimum rating 105 C, 30 Volts.
		
			AssemblyTwo to 100 insulated singles bonded together. Manufacturers will maintain record of the styles used. NOTE: If labeled singles are used, the thickness at the bonded sections must meet minimum requirements for the style used.
		
			CoveringOptional, extruded PVC, 5 mils min. at any point, 80 mils max.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring in class 2 circuits of Electronic Equipment. NOTE: If labeled singles are used, ensure the thickness at the bonded sections meets minimum requirements for the style used.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20159	Issued:1982-01-20
			Revised:2012-03-23


Rating	105 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturers AWM procedure using extruded PVC or extruded XLPVC insulation , minimum rating 105 C, 30 Volts.

Assembly	Two to 100 insulated singles bonded together. Manufacturers will maintain record of the styles used. NOTE: If labeled singles are used, the thickness at the bonded sections must meet minimum requirements for the style used.

Covering	Optional, extruded PVC, 5 mils min. at any point, 80 mils max.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring in class 2 circuits of Electronic Equipment. NOTE: If labeled singles are used, ensure the thickness at the bonded sections meets minimum requirements for the style used.