UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20160
                        
                            Issued:1982-01-22
                    
                            Revised:2012-04-23
                    
                            Style
                            20160
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 125 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyFirst layer: Two-ten insulated singles twisted together with 1.5 inches max length of lay. Binder of nylon lacing cord optional. 
Second layer (over First layer) Ten-twenty singles cabled around First layer with 1.5 - 2.0 length of lay. Fillers optional. May include PETP binder or barrier.
		
			ShieldOptional.
		
			JacketExtruded PVC. Jacket may be "Tubed" on in lieu of closely fitting jacket.
		
			Diameter of cable under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.250 or lessNot specified23
		
			0.351-1.000Not specified36
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External interconnect of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20160	Issued:1982-01-22
			Revised:2012-04-23


Rating	80 deg C, 125 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	First layer: Two-ten insulated singles twisted together with 1.5 inches max length of lay. Binder of nylon lacing cord optional. Second layer (over First layer) Ten-twenty singles cabled around First layer with 1.5 - 2.0 length of lay. Fillers optional. May include PETP binder or barrier.

Shield	Optional.

Jacket	Extruded PVC. Jacket may be "Tubed" on in lieu of closely fitting jacket.
	Diameter of cable under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.250 or less	Not specified	23
	0.351-1.000	Not specified	36

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External interconnect of electronic equipment and appliances.