UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20170
                        
                            Issued:1982-03-29
                    
                            Revised:2017-04-13
                    
                            Style
                            20170
                        
                            Jacketed Cable
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min., solid or stranded round, tinned or bare copper. May use same or mixed AWG size.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional- A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			BraidOptional.
		
			JacketPUR, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20170	Issued:1982-03-29
			Revised:2017-04-13


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min., solid or stranded round, tinned or bare copper. May use same or mixed AWG size.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional- A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Braid	Optional.

Jacket	PUR, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment