UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20172
                        
                            Issued:1982-04-15
                    
                            Revised:2012-07-16
                    
                            Style
                            20172
                        
                            Multiple conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 10 AWG material not specified.
		
			InsulationExtruded FRPE or extruded PE or extuded PVC or extruded XLPE or extruded XLPVC, or extruded foamed FRPE or extruded foamed PE or extuded foamed PVC or extruded foamed XLPE or extruded foamed XLPVC, 2 mils min average, 2 mils minimum 100 mils maximum.
		
			AssemblyTwo to six insulated singles may be twisted or laid parallel to form round, flat or oval cable. Barrier and/or fillers optional.
		
			ShieldOptional.
		
			CoveringOptional - 2 mils minimum of extruded PVC, extruded Polyamide, extruded Polyester, non-extruded Thermoplastic Polyvinylidence Fluoride Resin or extruded Thermoplastic Copolymer or Ethylene and Tetrafluorethylene or non-extruded lacquered braid.
		
			JacketExtruded PVC, 2 mils min average, 40 mils maximum.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20172	Issued:1982-04-15
			Revised:2012-07-16


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 10 AWG material not specified.

Insulation	Extruded FRPE or extruded PE or extuded PVC or extruded XLPE or extruded XLPVC, or extruded foamed FRPE or extruded foamed PE or extuded foamed PVC or extruded foamed XLPE or extruded foamed XLPVC, 2 mils min average, 2 mils minimum 100 mils maximum.

Assembly	Two to six insulated singles may be twisted or laid parallel to form round, flat or oval cable. Barrier and/or fillers optional.

Shield	Optional.

Covering	Optional - 2 mils minimum of extruded PVC, extruded Polyamide, extruded Polyester, non-extruded Thermoplastic Polyvinylidence Fluoride Resin or extruded Thermoplastic Copolymer or Ethylene and Tetrafluorethylene or non-extruded lacquered braid.

Jacket	Extruded PVC, 2 mils min average, 40 mils maximum.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.