UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20176
                        
                            Issued:1982-04-30
                    
                            Revised:2019-11-07
                    
                            Style
                            20176
                        
                            Bonded or laminated flat ribbon cable
                    
			Rating80 deg C, 150 Vac, Cable flame.
		
			Conductor36 AWG - 20 AWG solid or stranded flat or round copper.
		
			InsulationPE, 7 mils min average, 7 mils min at any point. Top and bottom of cable may form ridges.
		
			AssemblyOne or more layers of the flat cable with 20 mils min space between conductors, or flat cables complying with Sec. 2 of the Manufacturer's AWM Procedure.
		
			ShieldOptional, or expanded metallic ground planes, one or both sides. The ground plane may be flat copper or aluminum and may be employed as a solid or mesh constructions.
		
			CoveringOptional.
		
			JacketExtruded PVC
		
			Diameter of cable under jacket
		
			2.500 inches or less30 mils min average24 mils minimum at any point
		
			2.501-3.500 dia45 avg36 min
		
			Four or more cables24 avgand 36 min
		
			Three or less cables of 3.500 inches or less30 avg24 min
		
			If jacket is laminated the edge width shall be 45 mils min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment in Class 2 or 3 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20176	Issued:1982-04-30
			Revised:2019-11-07


Rating	80 deg C, 150 Vac, Cable flame.

Conductor	36 AWG - 20 AWG solid or stranded flat or round copper.

Insulation	PE, 7 mils min average, 7 mils min at any point. Top and bottom of cable may form ridges.

Assembly	One or more layers of the flat cable with 20 mils min space between conductors, or flat cables complying with Sec. 2 of the Manufacturer's AWM Procedure.

Shield	Optional, or expanded metallic ground planes, one or both sides. The ground plane may be flat copper or aluminum and may be employed as a solid or mesh constructions.

Covering	Optional.

Jacket	Extruded PVC
	Diameter of cable under jacket
	2.500 inches or less	30 mils min average	24 mils minimum at any point
	2.501-3.500 dia	45 avg	36 min
	Four or more cables	24 avg	and 36 min
	Three or less cables of 3.500 inches or less	30 avg	24 min
	If jacket is laminated the edge width shall be 45 mils min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment in Class 2 or 3 circuits only.