UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20200
                        
                            Issued:1982-11-18
                    
                            Revised:2012-05-21
                    
                            Style
                            20200
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating60 deg C, 300 Vac, Cable Flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			diameter of jacket in inches*mils minimum averagemils minimum at any point
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection or Internal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20200	Issued:1982-11-18
			Revised:2012-05-21


Rating	60 deg C, 300 Vac, Cable Flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	diameter of jacket in inches*	mils minimum average	mils minimum at any point
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection or Internal Wiring.