UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20201
                        
                            Issued:1982-10-11
                    
                            Revised:2019-11-07
                    
                            Style
                            20201
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating60 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.700 inches or less*30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia60 avg48 min
		
			1.000-1.500 dia80 avg64 min
		
			*major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20201	Issued:1982-10-11
			Revised:2019-11-07


Rating	60 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	dia of cable under jacket
	0.700 inches or less*	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	60 avg	48 min
	1.000-1.500 dia	80 avg	64 min
	*major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring.