UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20207
                        
                            Issued:1982-10-22
                    
                            Revised:2012-07-25
                    
                            Style
                            20207
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 600 Vac, Cable Flame.
		
			Conductor40 AWG minimum, Solid or Stranded Round. May use same or mixed AWG size.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional - Extruded PVC, 6 mil minimum at any point may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			diameter of cable under jacket in inches*mils minimum averagemils minimum at any point
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20207	Issued:1982-10-22
			Revised:2012-07-25


Rating	80 deg C, 600 Vac, Cable Flame.

Conductor	40 AWG minimum, Solid or Stranded Round. May use same or mixed AWG size.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional - Extruded PVC, 6 mil minimum at any point may be extruded over the conductor assembly.

Jacket	Extruded PVC
	diameter of cable under jacket in inches*	mils minimum average	mils minimum at any point
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring.