UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2021
                        
                            Issued:1959-05-01
                    
                            Revised:2012-02-29
                    
                            Style
                            2021
                        
                            Parallel Cable with Extruded Integral Insulation.
                    
			Rating80 deg C, 300 Vac, FT2 flame.  Optional - 60 or 80 deg C Oil.
		
			Conductor18 or 16 AWG stranded, consisting of No. 30 AWG or smaller strands.
		
			InsulationExtruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			AssemblyThree conductors similar as Type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of electric refrigerators where ripped not more than three inches and where exposed to temperatures not exceeding 80 deg C; or Wiring of Butter Conditioners where exposed at the door hinge at a temperature not exceeding 80 deg C.  Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2021	Issued:1959-05-01
			Revised:2012-02-29


Rating	80 deg C, 300 Vac, FT2 flame. Optional - 60 or 80 deg C Oil.

Conductor	18 or 16 AWG stranded, consisting of No. 30 AWG or smaller strands.

Insulation	Extruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Assembly	Three conductors similar as Type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of electric refrigerators where ripped not more than three inches and where exposed to temperatures not exceeding 80 deg C; or Wiring of Butter Conditioners where exposed at the door hinge at a temperature not exceeding 80 deg C. Polarity identification may be omitted.