UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20210
                        
                            Issued:1982-10-06
                    
                            Revised:2012-07-24
                    
                            Style
                            20210
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating125 deg C, 300 Vac.
		
			Conductor12, 14, 16 or 18 AWG, stranded.
		
			InsulationExtruded TPE, See facing page with the following (pin gauge) min dimensions: Average wall thickness 30 mils, Minimum wall thickness 20 mils, Web thickness 45 mils, Wall after rip 13 mils.
		
			AssemblyTwo conductors, The resistance wire is spirally wound around the insulated conductor, having the insulation alternately removed from approx 1/4 in. The AWG size and number of turns per inch will determine the watts per ft of the completed heating cable. The resistance wire is soldered to the exposed bare conductor.
		
			JacketExtruded TPE, 25 mils min average, 20 mils minimum at any point. See facing page for compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Useinternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20210	Issued:1982-10-06
			Revised:2012-07-24


Rating	125 deg C, 300 Vac.

Conductor	12, 14, 16 or 18 AWG, stranded.

Insulation	Extruded TPE, See facing page with the following (pin gauge) min dimensions: Average wall thickness 30 mils, Minimum wall thickness 20 mils, Web thickness 45 mils, Wall after rip 13 mils.

Assembly	Two conductors, The resistance wire is spirally wound around the insulated conductor, having the insulation alternately removed from approx 1/4 in. The AWG size and number of turns per inch will determine the watts per ft of the completed heating cable. The resistance wire is soldered to the exposed bare conductor.

Jacket	Extruded TPE, 25 mils min average, 20 mils minimum at any point. See facing page for compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	internal wiring.