UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20217
                        
                            Issued:1982-12-09
                    
                            Revised:2011-12-29
                    
                            Style
                            20217
                        
                            Coaxial Cable
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			ConductorTwo through ten. No. 40 AWG minimum, material not specified
		
			InsulationTFE, FEP, PVDF or ETFE, 5 mils min at any point, 40 mils maximum. May include barrier layer or fillers. The insulation may be applied directly over the conductor or applied as a spiral wrapped TFE, PFA, FEP, PVDF or ETFE thread (5 mils minimum, 40 mils maximum) and enclosed with "tubed on" insulation.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC irradiated PVC, polyamide, TFE, FEP PVDF, ETFE or lacquered braid, 2 mils minimum at any point, or 0.5 mils or heavier polyester film.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20217	Issued:1982-12-09
			Revised:2011-12-29


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	Two through ten. No. 40 AWG minimum, material not specified

Insulation	TFE, FEP, PVDF or ETFE, 5 mils min at any point, 40 mils maximum. May include barrier layer or fillers. The insulation may be applied directly over the conductor or applied as a spiral wrapped TFE, PFA, FEP, PVDF or ETFE thread (5 mils minimum, 40 mils maximum) and enclosed with "tubed on" insulation.

Shield	Optional.

Covering	Optional. Extruded PVC irradiated PVC, polyamide, TFE, FEP PVDF, ETFE or lacquered braid, 2 mils minimum at any point, or 0.5 mils or heavier polyester film.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 circuits in Electronic Equipment.