UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20218
                        
                            Issued:1982-12-13
                    
                            Revised:2012-04-26
                    
                            Style
                            20218
                        
                            Multiconductor flat cable with jacket.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 20 AWG solid or stranded, tinned or bare copper.
		
			InsulationExtruded PVC, 7 mils minimum thickness at any point, 14 mils minimum insulation between conductors, 100 mils minimum insulation edge width, 500 mils maximum web width.
		
			AssemblyTwo to 150 conductors. Drain wire and/or one or more selected conductors may be in electrical contact with the ground plane.
		
			BraidGround Plane - Copper or expanded copper mesh construction, 3 mils minimum thickness. PETP film or metal faced PETP. film 1 mil minimum thickness, may also be included between ground plane and insulated conductors and/or between ground plane and jacket over ground plane.
		
			JacketPVC film, 10 mils minimum average thickness is extruded over the ground plane assembly.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20218	Issued:1982-12-13
			Revised:2012-04-26


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 20 AWG solid or stranded, tinned or bare copper.

Insulation	Extruded PVC, 7 mils minimum thickness at any point, 14 mils minimum insulation between conductors, 100 mils minimum insulation edge width, 500 mils maximum web width.

Assembly	Two to 150 conductors. Drain wire and/or one or more selected conductors may be in electrical contact with the ground plane.

Braid	Ground Plane - Copper or expanded copper mesh construction, 3 mils minimum thickness. PETP film or metal faced PETP. film 1 mil minimum thickness, may also be included between ground plane and insulated conductors and/or between ground plane and jacket over ground plane.

Jacket	PVC film, 10 mils minimum average thickness is extruded over the ground plane assembly.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.