UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2022
                        
                            Issued:1959-05-01
                    
                            Revised:2011-12-02
                    
                            Style
                            2022
                        
                            Parallel cable with extruded integral insulation
                    
			Rating90 deg C, 300 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			ConductorThree No. 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

			InsulationSame as for Type SPT-2, PVC, 60 mils minimum average thickness, 54 mils minimum at any point.
		
			AssemblyThree conductor, same as SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Refrigerators where ripped not more than 3 in and where exposed to temperatures not ex- ceeding 90 deg C; or Wiring of Butter Conditioners where ex- posed at the door hinge at a temperature not exceeding 90 deg C. Either marking may also add where applicable de- pendent upon the compound use; and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C; whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2022	Issued:1959-05-01
			Revised:2011-12-02


Rating	90 deg C, 300 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	Three No. 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

Insulation	Same as for Type SPT-2, PVC, 60 mils minimum average thickness, 54 mils minimum at any point.

Assembly	Three conductor, same as SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Refrigerators where ripped not more than 3 in and where exposed to temperatures not ex- ceeding 90 deg C; or Wiring of Butter Conditioners where ex- posed at the door hinge at a temperature not exceeding 90 deg C. Either marking may also add where applicable de- pendent upon the compound use; and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C; whichever is applicable). Polarity identification may be omitted.